西门子株洲代理商西门子株洲代理商
概述
If a SIMATIC S7-300-based system is to communicate with a Siemenscontrol center, e.g. SIMATIC PCS7 TeleControl, WinCC TeleControl,WinCC OA, or a control center of a third-party supplier using theIEC60870-5 telecontrol standard, the IEC 60870-5-101 (serial), -103(protection) or -104 (TCP/IP) telecontrol protocols can be used inthe SIMATIC automation systems.
SIPLUS RIC libraries offer an integrated, scalable system based onSIMATICS7-300 functions, for the following data quantities:
• 200 information points, for use with CPU314
• 1000 information points, for use with CPU315
• 2000 information points, for use with CPU317
• 5000 information points, for use with CPU319
The non-retain memory can also be used for buffering messageframes. Longer communication failure times can thus be bridged. TheSIPLUS RIC software libraries are based on the standard SIMATICManager or TIA Portal and can be used on various, mutuallycompatible types of SIMATICS7 devices – this saves hardware costsand programming overhead.
The libraries on CD are supplied together with a SIMATIC memorycard, which can be used on all CPUs. Two versions with differentmemory sizes are available for selection.
With SIPLUS extreme hardware, telecontrol devices for an extendedambient temperature range (-40...+70°C) and exceptional exposure tomedia (conformal coating) can be implemented using the telecontrolprotocols.
A license certificate with the activation of all telecontrolprotocols IEC 60870-5-101 (serial), -103 (protection) or -104(TCP/IP) is supplied for the SIMATIC memory card included in thescope of delivery.
Note:
The SIPLUS RIC libraries for S7-300completely replace the previousSIPLUS RIC S7-300 bundles und SIPLUS RIC S7-300 extremebundles.
单个项目：
可以在可任意选择的单个项目中更新不是多重项目的主数据库（如 PCS 7库）的库中的块类型。对于这中集中式类型比较，还将调整所有关联的块实例。
装载程序以进行测试：
经过修改的程序可装载到测试系统中（另一个 CPU 或 PLCSIM）以便在将程序装载到目标程序之前测试更改的效果。使用“装载到测试CPU”(Load into test CPU) 功能（S7 装载对话框中的选项），程序将保留装载修改内容的功能。
全局声明：
在 SIMATIC Manager 的组件视图中，可以为每个项目选择“全局声明”(Global declarations)文件夹。该文件夹包含子文件夹“计数器”(Counters) 和“单位”(Units)。“单位”(Units) 文件夹已包含随 CFC安装的单位的列表；含有计数值的“计数器”(Counters) 文件夹中的计数必须手动插入或声明。
版本标识：
在版本管理中，在创建可以在对象属性中更改或与组态数据的相应工作状态匹配的图表、SFC 类型和全局声明时，将向它们分配版本号。
组态归档变量：
不归档
归档
长期归档
基本功能
编辑器功能
除了已熟知的 Windows 应用程序的标准功能外，CFC 编辑器还提供了以下功能：
通过双击块提供上下文环境导航：
根据在块上进行双击的位置，将出现相应对话框：
块标头：对象属性块
“运行时属性”(Run-time properties) 字段：运行时编辑器（可在这里标记相应的块）。
块体：打开下层图表（对于图中图布局）。
导入、放置、复制、移动、删除块。
| 6ES7518-4AP00-0AB0 | CPU 1518-4 PN/DP,3 MB 程序，10 MB 数据, 集成3PN,1DP | |
| 6ES7517-3AP00-0AB0 | CPU 1517-3 PN/DP, 2MB程序，集成 2PN 接口，1 以太网接口，1DP 接口 | |
| 6ES7516-3AN00-0AB0 | 6ES7516-3AN01-0AB0 | CPU 1516-3 PN/DP：1 MB 程序，5 MB 数据；10 ns ；集成 2PN 接口，1 以太网接口，1DP接口 |
| 6ES7515-2AM00-0AB0 | 6ES7515-2AM01-0AB0 | CPU 1515-2 PN ,500K程序,3M数据，集成 2PN接口 |
| 6ES7513-1AL00-0AB0 | 6ES7513-1AL01-0AB0 | CPU 1513-1 PN：300 KB 程序，1.5 MB 数据；40 ns；集成 2PN 接口， |
| 6ES7511-1AK00-0AB0 | 6ES7511-1AK01-0AB0 | CPU 1511-1 PN：150 KB 程序，1 MB 数据；60 ns；集成 2PN 接口， |
| 6ES7512-1DK00-0AB0 | 6ES7512-1DK01-0AB0 | CPU 1512SP-1 PN, 200KB 程序，1MB数据 |
| 6ES7510-1DJ00-0AB0 | 6ES7510-1DJ01-0AB0 | CPU 1510SP-1 PN, 100KB 程序，750KB数据 |
| 6ES7507-0RA00-0AB0 | PS：60 W，额定输入电压 AC/DC 120/230 V | |
| 6ES7505-0RA00-0AB0 | PS：60 W， 额定输入电压 DC 24/48/60 V | |
| 6ES7505-0KA00-0AB0 | PS：25 W，额定输入电压 DC 24 V | |
| 6ES7532-5HF00-0AB0 | AQ 8：模拟输出模块，8AQ，U/I ，高速 | |
| 6ES7532-5NB00-0AB0 | AQ 2: 模拟输出模块,2 AQXU/I ,标准型，25mm,包含前连接器 | |
| 6ES7532-5HD00-0AB0 | AQ 4：模拟输出模块，4AQ，U/I | |
| 6ES7531-7NF10-0AB0 | AI 8：模拟输入模块，8AI，U/I，高速 | |
| 6ES7531-7QD00-0AB0 | AI 4: 模拟输出模块: XU/I/RTD/TC ST, 25mm,包含前连接器 | |
| 6ES7531-7KF00-0AB0 | AI 8：模拟输入模块，8AI，U/I/RTD/TC | |
| 6ES7534-7QE00-0AB0 | AI4/AQ2：模拟量输入/输出模块4AI,2AO,标准型,25mm,包含前连接器 | |
| 6ES7523-1BL00-0AA0 | DI/DQ 16X24CDV/16X24VDC/0.5A BA,包含前连接器. | |
| 6ES7522-5HF00-0AB0 | DQ 8：数字输出模块，8DQ，继电器，230 V AC/ 5A | |
| 6ES7522-5FF00-0AB0 | DQ 8：数字输出模块，8DQ，可控硅，230V AC/ 2A | |
| 6ES7522-1BL00-0AB0 | DQ 32：数字输出模块，32DQ，晶体管，24 V DC/ 0.5A | |
| 6ES7522-1BH00-0AB0 | DQ 16：数字输出模块，16DQ，晶体管，24 V DC/ 0.5A | |
| 6ES7522-1BF00-0AB0 | DQ 8：数字输出模块，高性能 8DQ，晶体管，24V DC/2A | |
| 6ES7522-1BL10-0AA0 | DQ 32x24VDC/0.5A BA，包含前连接器 | |
| 6ES7522-1BH10-0AA0 | DQ 16x24VDC/0.5A BA，包含前连接器 | |
| 6ES7521-1FH00-0AA0 | DI 16：数字输入模块，16DI，230V AC BA | |
| 6ES7521-1BL00-0AB0 | DI 32：数字输入模块，高性能 32DI，24V DC | |
| 6ES7521-1BH50-0AA0 | DI 16：数字输入模块，源型，16DI， 24V DC BA | |
| 6ES7521-1BH00-0AB0 | 数字输入模块，高性能 16DI，24V DC |
If a SIMATIC S7-400/S7-400H-based system is to communicate with aSiemens control center, e.g. SIMATIC PCS7 TeleControl, WinCCTeleControl, WinCC OA, or a control center of a third-partysupplier using the IEC60870-5 telecontrol standard, the IEC60870-5-101 (serial), -103 (protection) or -104 (TCP/IP)telecontrol protocols can be used in the SIMATIC automationsystems.
SIPLUS RIC libraries offer an integrated, scalable system based onSIMATICS7-400/S7-400H functions for the following dataquantities:
• 1000 information points, for use with CPU412 or CPU 412H
• 2000 information points, for use with CPU414 or CPU 414H
• 5000 information points, for use with CPU 410H, CPU416/CPU 416Hor CPU 417/CPU 417H
The work memory for data which is limited to 256 MB in the CPU410Hfor data blocks generated online is used for buffering the frames.Longer communication failure times can thus be bridged. The SIPLUSRIC software libraries are based on the standard SIMATIC Manager orTIA Portal and can be used on various, mutually compatible types ofSIMATICS7 devices – this saves hardware costs and programmingoverhead.
The libraries are supplied on a CD and can be used on all CPUs.
A memory card (CPU V5.0 or higher) or a CPU (CPU V4.x or higher andCPU410H) are licensed. All IEC 60870-5-101 (serial), -103(protection) or -104 (TCP/IP) telecontrol protocols are activatedvia the email addresssiplus-ric.automation@siemens.com.
The SIPLUS RIC libraries for S7-400completely replace the previousSIPLUS RIC S7-400 bundles, SIPLUS RIC S7-400 extreme bundles, andIEC60870 libraries for SIMATIC PCS7.
